Communicate with Supplier? Supplier
Fulina Wu Ms. Fulina Wu
What can I do for you?
Chat Now Contact Supplier
 Tel:+86-0769-87788370 Email:fulina@d-ear.cn
Home > Video > Video Display > Wired Outdoor Self-Contained Unit Keypad Kit for Magnetic Locks LINAK11-DRA Wiring Instructions
Video

Wired Outdoor Self-Contained Unit Keypad Kit for Magnetic Locks LINAK11-DRA Wiring Instructions

You can purchase this kit at FORGET TO “ALWAYS” ISOLATE YOUR CONNECTIONS WITH ELECTRIC TAPE OR WIRE NUTS.“FIRST CUT OFF THE END OF THE POWER SUPPLY WIRE” 1. On the transformer identify the positive and negative wires. Note: the positive side has white dashes along the wire and the negative is solid black.2. Insert the provided key on the keypad locking mechanism and turn it to the open position. Remove the back plate of the keypad box.3. On the terminal block J4 ( Power and inputs ) locate the connectors 1 and 2 and connect a piece of wire to each one, keep in mind connector #1 is the positive terminal and connector #2 is the negative terminal.4. On the terminal block J3 (Outputs) connect a piece of wire to the connector # 2 ( Common ) and a piece of wire to connector # 3 ( Normally close )5. Connect the common and the negative from the key pad to the negative from the power supply6. Connect the positive from the key pad to the positive from the power supply; you should have the wire of the normally close free for the next step7. On the Linear DRA digital receiver, locate the power input cable and connect each wire to the power supply circuit wires, keeping in mind that the gold color wire is the positive and the silver color wire is the negative8. Connect the wire from the normally close of the keypad to the normally close of the receiver9. Connect a piece of wire to the common of the receiver and have it ready for the next step10. On the push button locate the normally close terminal and connect the wire coming from the common on the receiver11. On the push button locate the common terminal and connect an extra piece of wire, have it ready for the next step12. Connect an extra piece of wire to the negative terminal of the Maglock13. Connect an extra piece of wire to the positive terminal of the Maglock14. Connect the wire coming from the negative on the Maglock to the wire coming from the common on the push button15. Connect the wire coming from the positive on the Maglock to the positive of the power supply circuit16. You should have a fully operational kit now, connect the power supply to the power outlet and test your devices.

Previous :Creative Outlier One Bluetooth Earbuds | Unboxing and Video Review 2017

Next :Outdoor Pool Radio

Related Productslist

Home

Phone

Skype

Inquiry